Table of Contents
Advertisement
MENU OPERATIONS
Menu Operation Basics
To enter or exit the menu mode, use the MENU key. In the
menu mode, use the SEARCH dial, JOG/DATA dial and Ú
key for operations in the menu mode.
1 Press the MENU key.
The menu screen is displayed in the display window.
The following are displayed in each menu screen.
Menu No.
Menu item name Current setting value
Details Display
2 Use the JOG/DATA dial to select the desired menu item.
Turning the dial clockwise increments the menu No.,
while turning it counterclockwise decrements the menu
No.
At this stage, the menu No. blinks to indicate that the
menu item is currently selected.
The menu item display is scrolled immediately after
the screen is switched, and then the leading 12
characters are displayed fixed in the display window.
For some menu items, the details of individual setting
values are displayed in addition to the item details.
14
TASCAM RC-601MKII
3 Either press the Ú key, or turn the SEARCH dial
clockwise (towards YES) to apply the selected menu
item.
The menu No. stops blinking and stays lit.
The following steps (4 to 6) are not applied to menu
No. 05 ("PROG"), menu No. 21 ("A_CLR") and the
total motor time display.
4 Use the JOG/DATA dial to select the desired setting
value.
The current setting value blinks when it is changed.
5 Either press the Ú key, or turn the SEARCH dial
clockwise (towards YES) to apply the selected setting
item. When the new settings are fixed, the menu mode
automatically ends.
[NOTE]
•
The alphabet characters of the menu item names are
displayed as follows:
•
All operations including menu operations on the
CD-601MKII are not accepted while menu operations are
being performed on the RC-601MKII.
•
Likewise, when menu operations are being performed
on the CD-601MKII, all RC-601MKII operations including
menu operations are not accepted.
Advertisement
Table of Contents
