Table of Contents
Advertisement
INTRODUCTION
Before you start using this product, thoroughly read and
understand this manual. After you have finished reading this
manual, be sure to keep it in a safe place so that it can be
retrieved whenever necessary.
The RC-601MKII is the remote control unit exclusively
for the CD-601MKII. Connecting the RC-601MKII to the
CD-601MKII not only allows you to use lots more functions
but also makes operation of the CD-601MKII easier.
MAIN FUNCTIONS/ADDITIONAL
FUNCTIONS
The following functions can be expanded and added on to
the CD-601MKII by connecting the RC-601MKII:
Time chart/index search using the numeric keys
Search using the jog/search dial
End check function that allows you to listen to the end of
tracks
Various repeat playback functions (1 tune repeat, all
tunes repeat, program repeat, repeat playback between A
and B)
Cue point locate function. Up to ten cue points can be
registered to each disc.
Instant start from cue point (flash start function)
Cue point settings for 500 discs can be stored to
memory.
Playback between memo points (A and B)
Monitoring of output from up to four external audio
equipment on headphones
About Terms Used in This Manual
This manual uses the following terms:
"Online READY" is used to indicate an "online playback
standby state" and
"Monitor PAUSE" is used to indicate a "monitor playback
standby state."
CAUTION
Before connecting or disconnecting the connector cable to
or from the CD-601MKII, first turn the CD-601MKII OFF.
Connecting or disconnecting the connector cable with the
power turned ON may cause the remote control unit to
malfunction.
Product Configuration
This product comprises the following:
•
RC-601MKII unit
•
Connector cable (5 m)
•
Owner's Manual (this manual)
•
Warranty
When unpacking this product, take care not to damage the
product. Store the box and packaging materials so that they
can be used for transporting the product at a later date.
If you find that any parts are missing or parts have been
damaged during transportation, contact your dealer
immediately.
CD-601MKII Operation Settings
Operation on the CD-601MKII can be selected between
enabled and disabled when the RC-601MKII is connected.
Set enable/disable using menu No. 17 ("RMT").
R_L (Remote + Local): Operation is possible on both the
RC-601MKII and the CD-601MKII.
R (Remote): Operation is possible on only the RC-601MKII.
Operation of the CD-601MKII by keys other than the
OPEN/CLOSE and DISP MODE key is disabled.
* For details on menu operations, see "Menu Operations"
(page 13).
About Backup Memory
The following setup information is stored to backup
memory on the CD-601MKII so that the same settings are
reproduced when this product is next turned ON.
•
Playback mode
•
Time display mode
•
Auto ready function ON/OFF
•
Auto cue function ON/OFF
•
Pitch control function ON/OFF
•
Pitch control value
•
Index search function ON/OFF
•
Settings for each of the menu items (*)
(*): When the "USER" menu is set to "PRE", the menu item
settings return to their defaults each time that the power
is turned ON. (→ page 15 "Saving Menu Settings")
x 1
x 1
x 1
x 1
3
TASCAM RC-601MKII
Advertisement
Table of Contents
