Pro-Form PFTL59510.0 User Manual page 10

7. Identify the Right Base Cover (91) and the Left
Base Cover (88). Slide the Right Base Cover
onto the Right Upright (85). Slide the Left Base
Cover onto the Left Upright (84).
8. Remove the tie from the bracket on the Right
Handrail (83). If necessary, press the 5/16" Cage
Nuts (38) back into place.
Hold the Right Handrail (83) near the Right
Upright (85). Position the Upright Wire (87) on
the Right Handrail as shown.
Set the Right Handrail (83) on the Right Upright
(85). See the inset drawing. Make sure that
the Upright Wire (87) is positioned as shown
and is not pinched.
Attach the Right Handrail (83) to the Right
Upright (85) with three 5/16" x 1" Bolts (4) and
two 5/16" Star Washers (13) as shown. Do not
tighten the Bolts yet.
Attach the Left Handrail (not shown) in the
same way. Note: There is no wire on the left
side.
7
84
88
8
4
13
83
10
85
87
38
Tie
4
85
87
85
91