Exporting Tracks - Tascam DP-02 Owner's Manual

2 – Advanced techniques IMPORTANT SAFETY PRECAUTIONS
6. Use the to select the WAV file to be
DATA dial
imported and press YES/ENTER
The display shows the amount of free space on the
current partition, and the size of the selected WAV
file.
NOTE
Make sure the target track is an empty track. You
cannot import a track unless the target track is empty.

Exporting tracks

Any track can be exported as a mono, 16-bit 44.1kHz WAV
format file.
1. From the screen, select and enter the
MENU
menu.
2. Select the
E X P O R T T R A C K
YES/ENTER key.
The display shows a list of suggested file names,
based on the song tracks which contain audio:
NOTE
If a track does not contain audio, it does not appear in
this list.
3. Use the DATA dial or cursor (
a track, and rotate the
it for export. A " " appears on the check box.
Repeat this action to select multiple tracks to export.
To deselect a track, use the cursor (
highlight and rotate the dial countercolckwise. The
check mark disappears.

TASCAM DP-02/DP-02CF
.
W A V E
action and press the
, ) keys to highlight
§ ¶
dial clockwise to mark
DATA
, ) keys to
§ ¶
7. Use the to select the track into which the
DATA dial
WAV file will be imported. Press
Appropriate messages are shown if there is not
enough space, the file is in the wrong format, etc.
The unit reads the file from the FAT partition into the
track, with the start of the file at the "zero" position in the
song.
Once the file has been read into the track, it can be edited
(moved, copied, etc.) like any other recorded track. See
"About track editing" on page 47.
When the cursor is by a track, you can press
MENU to bring up a titling screen:
Edit the name, and press
YES/ENTER
finished ("Titling" on page 11).
4. When all tracks for export have been selected, press
.
YES/ENTER
The display shows the free space on the FAT parti-
tion (the destination of the exported tracks) and the
space which the exported tracks will occupy.
5. Press to export the selected tracks.
YES/ENTER
The tracks are exported with the names you entered
(a .WAV extension is added). If you already have
exported a track file with the same name as one you
have chosen, a message appears asking you if you
want to overwrite the older file.
6. Connect the unit to the computer and "open" the
recording media (""Open" and "Close"" on page 43).
7. Use the PC operating system to copy or move the
exported tracks from the
FAT partition to the PC.
Once the tracks are on the PC, you can "close" the unit.
The exported tracks on the PC can then be backed up to
CD-R, etc.
YES/ENTER .
SHIFT and
when you're
directory of the unit
W A V E