Song Information; Assigning Inputs; Clearing An Assignment - Tascam DP-02 Owner's Manual

1 – Starting out with your DP-02/DP-02CF IMPORTANT SAFETY INSTRUCTIONS

Song information

You can view the title, working partition, and amount of
time left for recording from the "home screen".
From the home screen, press and hold the
press the SONG key.
The display shows:
the current partition (
P A R T I T I O N
amount of time left on the partition for recording (
in minutes.
Pressing the NO/EXIT key returns to the home screen.

Assigning inputs

When we talk about "assigning" inputs, we are talking
about routing the signals from the two inputs to the tracks.
You can record on up to two tracks at a time. This means
that the same input can be assigned to two tracks at the
same time (but you can't then use the other input) or the
two inputs can be assigned to different tracks. You can't
assign both inputs to the same track at the same time.
ASSIGN keys
Eight REC keys
1. Press and hold the ASSIGN
to the input signal you are assigning (
T I P
Press and hold SHIFT and either of the ASSIGN keys
(A or B) to turn the inputs on or off as shown by the
indicator. You may want to turn off unused inputs to
reduce noise.
SHIFT key and
), song title ( ) and
S O N G
)
R E M A I N
key corresponding
or ).
A B
Additional song operations
Further song operations are described in "Advanced song
management" on page 41.
2. While holding down the
key of the track to which you are assigning the
REC
input. The key flashes rapidly.
REC
If you want to assign the input to another track, you must
first clear the current assignment (see below), and then
re-assign the input.
Note that the key of the first track to which you
REC
assigned the input flashes when you hold down the
key.
ASSIGN

Clearing an assignment

ª
Hold down the key to check current assignments,
ASSIGN
then while holding the
ASSIGN
ments by pressing a flashing
flashing).
TASCAM DP-02/DP-02CF
key, press the
ASSIGN
key, clear current assign-
REC key (which then stops