ENGLISH • Do not subjects the battery to strong shocks or throw it. Doing so - Thank you for choosing an E-bike equipped with Polini E-P3 motor. may cause bursting or ignition of the battery. - Only drive your vehicle using protective clothing •...
CAUTION • The use of a Polini genuine battery is recommended 1- To keep the travelling data updated on the display, first turn the • Keep out of the reach of children display off and then the battery.
DANGER 4. Grab the upper side of the battery and remove it from the holder. • Use the POLINI specified battery charger and observe the specified charging conditions when charging the battery. Not doing so may cause overheating, bursting or ignition of the battery.
WARNING: charge the battery respecting the safety advises. 3.6- Charging the battery ➔ The battery is prearranged and designed to be used with E-P3 Polini CAUTION: evoid any deposit of dirt on the connections of the system only. battery chargers and connectors.
Short pressure: lights ON Long pressure: lights OFF 3.8 Dual Battery 4.2- Displays For this system use exclusively two Polini E-P3 batteries– Item Displays offer different information. Lateral movements of the 955.830.001. Switch both the batteries ON to activate the dual battery system.
Riding performance Average speed of the distance travelled Riding performance example Example of the average speed of the distance It displays the average travelled Watt power generated by the rider. > average speed It displays the average speed from the last reset of the data Motor power Maximum speed of the distance travelled...
Page 8
Total distance travelled/ maximum speed 3. The block is provided with 2 cables fixing points, + (pink) and – (black). Connect the + of the motor to the + of the front and rear Example of the maximum lights. Connect the - of the motor to the - of the front and rear lights. speed 4.
- unscrew the cap of the grease tank and add about 2/3 grams of Polini grease. (item 955.435.001) - Fit all the parts again paying attention to tight the crown holder screw properly (5/6Nm torque) Tight the upper dowel for your safety The water bottle holder is a Polini patented product. ENGLISH...
Register your device on www.poliniebike.com to activate the warranty and to receive updates and novelty of the E-P3 motor. CUSTOMER SERVICE: ebike@polini.com • Use Polini Motori original spare parts only Updated Firmware are available on www.poliniebike.com • Manufacturer is free to modify the products to improve their cha- Besides the Firmware it is possible (with the cable connected to the racteristic and performance.
Page 11
SEDE LEGALE ED OPERATIVA : Via Piave, 30 – 24022 Alzano Lombardo (BG) DICHIARA: Che il sistema per E-Bike denominato Polini E-P3 (955.002.001 – 955.002.002 – 955.002.003) costruito presso la propria sede operativa è composto da seguenti componenti: MOTORE BATTERIA CARICA BATTERIA è...
Need help?
Do you have a question about the motori E-P3 and is the answer not in the manual?
Questions and answers