Tascam CD-01U Specifications page 11

4-12. PITCH CONTROL DATA PRESET
Sets the Pitch Control value from –12.5% to +12.5% in 0.1% steps.
When this command is transmitted with request data ([FF]), the controlled device returns the PITCH
CONTROL DATA RETURN command [A5].
The pitch control function is turned on and off using the PITCH CONTROL SELECT command [35].
Command
Data
Return
Data 1 Data 2
N2 N3
F F
· If the specified data is out of range, the controlled device sends ILLEGAL [F2].
4-13. TIME SEARCH PRESET
Locates to the specified track and time in minutes and seconds. If the controlled device is in stop or play
mode, playback will start at the specified time. If the controlled device is in ready mode, the playback
position will move to the specified time, and the controlled device will enter ready mode there. The time
specified must be a valid time (e.g. the track must exist on the disc).
This command cannot use for MP3 discs.
Command
Data
Return
Description
Data 1 Tens digit of track number
Data 2 Units digit of track number
Data 3 Thousands digit of track number
Data 4 Hundreds digit of track number
Data 5 Tens digit of minutes
Data 6 Units digit of minutes
Data 7 Thousands digit of minutes
Data 8 Hundreds digit of minutes
Data 9 Tens digit of seconds
Data 10 Units digit of seconds
Data 11 Tens digit of frames
Data 12 Units digit of frames
· If the specified data (Track number and time) does not exist on the disc, the controlled device sends
ILLEGAL [F2].
TASCAM CD-01U/CD-01U PRO RS-232C Protocol Specifications
25
4 bytes or 2 bytes
PITCH DATA RETURN [A5]
Data 3 Data 4 Description
0
1
N1
Preset %
... Pitch Control
value request
2C
12 bytes
None
11
Remarks
Positive (+) value
Negative (-) value
N1: Tens of pitch control value
N2: Units of pitch control value
st
N3: 1 decimal of pitch control value
[Sample] 2010: -2.0%
Requests the currently set the Pitch
Control value
Remarks
[Sample]
020003001030: 2tr 03m 10s 30f
TEAC Corporation