Page of 26

Tascam CD-01U Specifications Page 25

Control i/o terminals rs-232c protocol specifications.
Hide thumbs

Advertisement

5-23. PGM TOTAL TRACK No./TOTAL TIME RETURN
Transmitted in response to a PGM TOTAL TRACK No./TOTAL TIME SENSE command [5E], giving the
total number of the programmed tracks and the running time of the programmed tracks.
Command
Data
Request command PGM TOTAL TRACK No./TOTAL TIME SENSE [5E]
Description
Data 1
Tens digit of total tracks
Data 2
Units digit of total tracks
Data 3
Thousands digit of total tracks
Data 4
Hundreds digit of total tracks
Data 5
Tens digit of minutes
Data 6
Units digit of minutes
Data 7
Thousands digit of minutes
Data 8
Hundreds digit of minutes
Data 9
Tens digit of seconds
Data 10
Units digit of seconds
Data 11
Tens digit of frames
Data 12
Units digit of frames
5-24. ERROR SENSE REQUEST
Transmitted from the controlled device to the external controller to indicate an error condition. On
receipt of this message, the external controller should issue an ERROR SENSE request [78] in order to
determine the error type.
Command
Data
Request command None
5-25. ILLEGAL STATUS
Transmitted from the controlled device to the external controller in order to indicate illegal status,
caused by an invalid command having been received. The external controller does not need to reply to
this message (though it may, of course, attempt to re-send a corrected version of the message, etc.)
Command
Data
Request command None
5-26. POWER ON STATUS
Transmitted from the controlled device to the external controller in order to signal power-up.
Command
Data
Request command None
5-27. CHANGE STATUS
Transmitted from the controlled device to the external controller. There are two types of change which
may be transmitted, each or which requires a reply by the external controller, as explained below.
Command
Data
Request command None
Data 1
Data 2
Description
0
0
Mechanism Status Change
0
3
Track Status Changes
TASCAM CD-01U/CD-01U PRO RS-232C Protocol Specifications
DE
12 bytes
F0
None
F2
None
F4
None
F6
2 bytes
Remarks
Mechanism status has been changed
Track number or EOM status has been changed
25
Remarks
TEAC Corporation

Advertisement

   Also See for Tascam CD-01U

   Related Manuals for Tascam CD-01U

This manual also for:

Cd-01upro

Comments to this Manuals

Symbols: 0
Latest comments: