Page of 26

Tascam CD-01U Specifications Page 12

Control i/o terminals rs-232c protocol specifications.
Hide thumbs

Advertisement

4-14. FADE IN/OUT TIME PRESET
Sets the fade in and out time from 1 to 10 seconds in 1 second steps.
When this command is transmitted with request data ([00FF] or [01FF]), the controlled device returns
the FADE IN/OUT TIME RETURN command [AE].
The FADE mode is turned on and off using the FADE IN/OUT SELECT command [3E].
Command
Data
Return
Data 1
Data 2
Data 3
0
0
Tens digit of Fade In time
0
0
F
0
1
Tens digit of Fade Out time
0
1
F
· If the specified data is other than described above, the controlled device sends ILLEGAL [F2].
· If the specified data is out of range, the controlled device sends ILLEGAL [F2].
4-15. AUTO CUE SELECT
Turns the Auto Cue function on and off.
When this command is transmitted with request data ([FF]), the controlled device returns the AUTO
CUE SELECT RETURN command [B0].
The Auto Cue level is set using the AUTO CUE LEVEL PRESET command [20].
Command
Data
Return
Data 1
Data 2
Description
0
0
AUTO CUE MODE OFF
0
1
AUTO CUE MODE ON
F
F
Auto Cue mode status request Requests the Auto Cue mode status
· If the specified data is other than described above, the controlled device sends ILLEGAL [F2].
4-16. EOM TRACK TIME SELECT
Sets the EOM (End of message) time.
When this command is transmitted with request data ([FF]), the controlled device returns the EOM
TRACK TIME RETURN command [B2].
The EOM time should be set to 00, 05, 10, 15, 20, 25, 30, or 35.
Command
Data
Return
Data 1
Data 2
Description
N1
N2
Sec
F
F
EOM time request
· If the specified data is other than described above, the controlled device sends ILLEGAL [F2].
TASCAM CD-01U/CD-01U PRO RS-232C Protocol Specifications
2E
4 bytes
FADE IN/OUT TIME RETURN [AE]
Data 4
Units digit of Fade In time
F
Units digit of Fade Out time
F
30
2 bytes
AUTO CUE SELECT RETURN [B0]
32
2 bytes
EOM TRACK TIME RETURN [B2]
12
Remarks
Sets the Fade In time
Requests the Fade In
time
Sets the fade Out time
Requests the Fade
Out time
Remarks
Turns the Auto Cue function off
Turns the Auto Cue function on
Remarks
N1: Tens digit of EOM time
N2: Units digit of EOM time
(00, 05, 10, 15, 20, 25, 30, or 35)
Requests the EOM time
TEAC Corporation

Advertisement

   Also See for Tascam CD-01U

   Related Manuals for Tascam CD-01U

This manual also for:

Cd-01upro

Comments to this Manuals

Symbols: 0
Latest comments: