Call Block Settings; Set Smart Call Blocker On/Off; Set Profile - AT&T DL72119 Quick Start Manual

Smart call blocker

Call block settings

Set Smart call blocker on/off

The Smart call blocker feature is set to on by default.
1. Press /SELECT to enter the main menu when
MENU
the handset is not in use.
2. Press or
CID
/SELECT.
press
MENU
/SELECT again to select SCB On/Off.
3. Press
MENU
4. Press or
CID
press /SELECT to save the setting. You hear a
MENU
confirmation tone.
Note: If you set SCB On/Off to Off, all settings under Set profile (see below) will be invalid.

Set profile

There are five profile setting options, which allows you to quickly set up Smart
call blocker.
1. Press MENU/
2. Press q or p
CID
3. Press q or p
CID
4. Press q or p
CID
/SELECT.
MENU
Screen unknown - screen any home calls without numbers or with
f f
numbers not saved in the directory, allow list, or star name list.
This profile setting sets the telephone to screen all unknown home calls and asks the
− f
callers to say their names before putting the calls through to you. See Screen unknown
home calls on page 67.
Screen robot - screen robocalls.
f f
This profile setting sets the telephone to screen all unknown home calls and asks the
−
f
callers to press the pound key (#) before putting the calls through to you. See Screen
robocalls on page 70.
to scroll to Smart call blk, then
DIR
to highlight On or Off, then
DIR
to enter the main menu when the handset is not in use.
SELECT
to scroll to Smart call blk, then press
DIR
to scroll to Set profile, then press
DIR
to select one of the following options, then press
DIR
49
/SELECT.
MENU
/SELECT.
MENU