Wall-Mount To Tabletop Installation - AT&T DL72119 Quick Start Manual

Getting started
Installation options

Wall-mount to tabletop installation

To change the telephone base from the
wall-mount position to tabletop position,
follow the steps, as mentioned below.
1. Unplug the large end of the power
adapter from the electrical outlet.
2. If the telephone line cord and power
adapter cord are bundled, untie them
first. Slide the wall-mount bracket up and
remove it from the wall-mounting plate.
3. Unplug the telephone line cord or the
DSL filter from the telephone wall jack.
Push the telephone base up and away
from the wall-mount bracket to detach it
from the wall-mount bracket.
4. See Telephone base installation on page 6.
12