Table of Contents
Advertisement
Menu Operation
SENS-UP setting
If pictures are not clear due to darkness, this SENS-UP
operation would increase the sensitivity of picture.
1.
Use [UP] or [DOWN] button to select [SENS-UP] option.
2.
Use [LEFT] or [RIGHT] button to select mode.
AUTO: Adjust the sensitivity of the picture
automatically.
>
SENS-UP LIMIT: Use [LEFT] or [RIGHT] button
to set the SENS-UP limit.
OFF: Not used.
Note:
If you set to one of the SHUTTER options except AUTO and
OFF on the [SHUTTER] menu, the [SENS-UP] setting is not
available and [---] mark is displayed.
White Balance settings
Select the method by which the camera shifts its output
colors to compensate for the color of a light source.
1.
Select [WHITE BAL] option.
2.
Use [LEFT] or [RIGHT] button to select a mode then
press [SET].
ATW (Auto-Tracing White Balance): Use [LEFT] or
[RIGHT] button to select the ATW then press [SET]
25
Advertisement
Table of Contents
