Related Manuals for LG LCD5300R-BN
Summary of Contents for LG LCD5300R-BN
- Page 1 OWNER'S MANUAL IR Dome Camera Please read this manual carefully before operating your set and retain it for future reference. MODEL LCD5300R-BN LCD5300R-BP...
- Page 2 FCC WARNING: This equipment may generate or use radio CAUTION frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction RISK OF ELECTRIC SHOCK manual. The user could lose the authority to operate this DO NOT OPEN equipment if an unauthorized change or modification is made.
- Page 3 • Caution: Danger of explosion if battery is incorrectly Caution: This installation should be made by a qualified replaced. Replaced only with the same or equivalent service person and should conform to all local codes. type recommended by the manufacturer. Dispose Caution: To avoid electrical shock, do not open the of used batteries according to the manufacturer’s cabinet.
- Page 4 LG Electronics hereby declares Disposal of your old appliance that this/these product(s) is/are in compliance with the essential This crossed-out wheeled bin symbol requirements and other relevant indicates that waste electrical and provisions of Directive 2004/108/EC electronic products (WEEE) should and 2011/65/EU.
- Page 5 Important Safety Instructions Read these instructions. pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. Keep these instructions. 11. Only use attachments/accessories specified by the Heed all warnings. manufacturer. Follow all instructions. 12. Use only with the cart, stand, tripod, bracket, or Do not use this apparatus near water.
- Page 6 Cautions for Safe Operation Power Supply Operating and storage location This camera must always be operated DC 12 V or AC 24 Avoid viewing a very bright object (such as light fittings) V.Certified/Listed Adaptor which comply with LPS. during an extended period. Avoid operating or storing the unit in the following locations.
-
Page 7: Table Of Contents
Contents Features ................8 Privacy Mask Setting .............29 Accessories .................. 8 Special Menu Settings ............31 Part Names and Functions ............ 9 SYSTEM Setting ...............35 Connections ..............11 Specification ..............36 Basic connection ..............11 Installation ..............12 Mounting the Camera ............12 Image Adjustment ..............14 Menu Operation.............. -
Page 8: Features
Features This IR Bullet Camera is designed for installation in a video Accessories surveillance system. This manual contains instructions on how to install and manage the IR Bullet Camera in your video surveillance n100 Cutting Line FRONT system. MEZ62687703 SELFTAPPING SCREW 4 Place Should you require any technical assistance, please contact PRODUCT CENTER POSITION... -
Page 9: Part Names And Functions
Part Names and Functions a Dome Cover b IR LED c IR Sensor d Focus lock lever Fixes the focus position after adjusting. e Zoom lock lever Fixes the zoom position after adjusting. f Rotate adjuster Adjusts the rotate angle to obtain a level image. g Lock button You can lock the camera mounting bracket by using the lock button. - Page 10 Part Names and Functions h Pan adjuster Adjusts the pan position. i Video Out connector Use this jack for checking the picture with portable monitor when install the camera. j Setup menu control buttons k Power input connector Supplies AC 24 V or DC 12 V from an external power source.
-
Page 11: Connections
Connections Basic connection Connect a external power source to the power input jack of the camera. (recommended power adapter is The peripheral devices (DVR, monitor, etc.), AC/DC adapter AC 24 V/0.5 A, DC 12 V/0.5 A or above) and cables are not supplied. Make the video signal connection between the camera and the monitor or DVR. -
Page 12: Installation
Installation Pass the connection cable through the inner side of Mounting the Camera the ceiling. Surface mount Follow the instructions below to surface mount the camera with supplied camera mounting bracket. Use the installation guide template to check the mounting location. Face the front of the label toward the area of interest. - Page 13 Installation Install the camera mounting bracket to the ceiling. Connect the cables to the cable jacks of the camera body.
-
Page 14: Image Adjustment
Installation Assemble the camera and mounting bracket after Image Adjustment align the front part of the camera and mounting bracket. Connect the unit by following step a and You can manually adjust the pan/tilt/azimuth angles, focus, and zoom while observing the connected monitor. Notes: Do not hold the camera by lens unit to adjust panning, tilting, or azimuth. - Page 15 Installation Connect a portable monitor to the video jack. Adjust the pan/tilt/rotate position of the camera. TILT ROTATE...
- Page 16 Installation Adjust the zoom. Adjust the focus. 4-1. Unlock the zoom lever. 5-1. Unlock the focus lever. 4-2. Move the lever to adjust the zoom. 5-2. Move the lever to adjust the focus. 4-3. Lock the lever. 5-3. Lock the lever. NEAR TELE WIDE...
- Page 17 Installation This camera utilizes an on-screen user MENU. To set Note: items on the menu, use the following buttons. After To disassemble the camera from the mounting bracket, then attach the lens cover and dome cover. rotate the camera counterclockwise with pressing the PUSH button inside the camera body.
-
Page 18: Menu Operation
Menu Operation Menu Operation OSD Menu control buttons UP button: Used to move upper direction on the menu screen. This camera utilizes an on-screen user MENU. To set items Use this button to select an item or adjust the param- on the menu, use the following buttons. -
Page 19: Osd Menu Overview
Menu Operation OSD Menu Overview BURST ON/OFF LEVEL LOW/ MIDDLE/ HIGH/USER AUTO The following table shows the list of menu items and op- DWELL 3 SEC to 60 SEC DAY/ TIME tions. You can adapt the camera to your requirements by NIGHT setting up the respective items in these menus. - Page 20 Menu Operation MOTION MASK EXIT RET/ TOP / END 1 to 2 SELECTION OFF /MOSAIC / 3D-DNR 0 to 100 DISPLAY POLYGON PRIVACY COLOR1 to COLOR8 MASK SHAPE MASK 1 to 8 POSITION SELECTION OFF / MOSAIC EXIT RET/ TOP / END DISPLAY / COLOR1 to COLOR8...
-
Page 21: General Operation
Menu Operation General Operation FACTORY RESET SYSTEM EXIT RET/ TOP / END Press [SET] button. EXIT RET/ TOP / END The Main OSD menu screen appears on the monitor. Use [UP] or [DOWN] button to select an option then press [SET] button. Submenu appears on the monitor. -
Page 22: Exposure Settings
Menu Operation previous setup menu. Backlight setting RETURN: Return to the previous. Use Backlight option to view the object clearly in backlight conditions. Exposure Settings You can set the exposure options using the EXPOSURE menu. Select [EXPOSURE] option on the [CAMERA SETTING] menu. - Page 23 Menu Operation HSBLC: Use for masking brightness of the specific BRIGHTNESS setting area to view the subject more clearly. The HSBLC You can increase the brightness of the darkened video. mode is automatically activated only in low If you set the brightness to lower value, the image is luminance scene.
- Page 24 Menu Operation AGC (Automatic Gain Control) setting If the images are too dark, change the maximum [AGC] value to make the images brighter. But noise is increase. Select [SHUTTER] option. Use [LEFT] or [RIGHT] button to set shutter speed. Notes: Select [AGC] option.
-
Page 25: White Balance Settings
Menu Operation SENS-UP setting Note: If you set to one of the SHUTTER options except AUTO and If pictures are not clear due to darkness, this SENS-UP OFF on the [SHUTTER] menu, the [SENS-UP] setting is not operation would increase the sensitivity of picture. available and [---] mark is displayed. -
Page 26: Day/Night Setting
Menu Operation button. Day/Night Setting MANUAL: You can set the white balance options manually. > RED: Obtains the optimum amount of red gain. > BLUE: Obtains the optimum amount of blue gain. AWC/SET KEY: If you select the AWC/SET KEY mode, you will be able to set up the White Balance automatically using [SET] button. -
Page 27: Smartir Setting
Menu Operation > LEVEL: Use [LEFT] or [RIGHT] button to select SmartIR Setting a level. SmartIR function improve the sensitivity in the low > DWELL TIME: Use [LEFT] or [RIGHT] button to luminance. SmartIR analyze the image of the screen, select a dwell time. -
Page 28: Motion Detection Setting
Menu Operation SIZE : Enlarge or decrease the horizontal Select [AREA SETUP] option. size of the prevent saturation zone. Use [LEFT] or [RIGHT] button to select a area (1/8 SIZE : Enlarge or decrease the vertical size of to 8/8) on the [AREA SELECTION]. the prevent saturation zone. -
Page 29: 3D-Dnr Setting
Menu Operation 3D-DNR Setting Privacy Mask Setting This function is aiming at the protection of personal privacy, selecting a screen part black not to be displayed in the screen. Up to 8 zones can be registered. Select [3D-DNR] option. If pictures are not clear due to brightness, this option would reduce the noise of picture. - Page 30 Menu Operation OFF, MOSAIC, COLOR 1 to COLOR 8 on the option. DISPLAY option. POSITION : Moves horizontal > Use [UP] or [DOWN] to select an option then position of the mask. use [LEFT] or [RIGHT] button to adjust the POSITION : Moves vertical position option.
-
Page 31: Special Menu Settings
Menu Operation [SET] button to move the polygon on the Special Menu Settings [POSITION]. This menu lets you adjust and set up D-ZOOM, D-EFFECT, Note: SHARPNESS, COLOR, SYNC, USER TITLE, LANGUAGE You can adjust the mask color manually except for color 8. function by yourself in the SPECIAL menu. - Page 32 Menu Operation D-ZOOM (Digital Zoom ) Setting TILT: Use [LEFT] or [RIGHT] button to move the screen. You can select the digital zoom level. Note: If you set the [D-ZOOM] to ON, the ZOOM level is set to [x1.0] automatically. D-EFFECT (Digital effect) Setting You can select the digital effect.
- Page 33 Menu Operation MIRROR: Turn on the mirror effect. COLOR Setting OFF: Turn off the digital effect. You can switch the displayed picture to gray scale or color. SHARPNESS Setting The degree to which the boundary of the two portions is clearly distinguished.
- Page 34 Menu Operation SYNC Setting USER TITLE Setting You can use the camera identification to assign a number and character to the camera. To disappear the user title, select [OFF]. Select [USER TITLE] option on the [SPECIAL] menu. Use [LEFT] or [RIGHT] button to select a [ON] then press [SET].
-
Page 35: System Setting
Menu Operation A (Blank): Inserts a space at the cursor position. SYSTEM Setting : Moves cursor to left or right. LANGUAGE Setting Select the viewer language for the camera setup menu and OSD information display. Select the [SYSTEM] menu. Press [SET] button and the SYSTEM menu appears. Use [UP] or [DOWN] button to select the option. -
Page 36: Specification
Specification Item LCD5300R-BN LCD5300R-BP Signal System NTSC Image Device 6 mm (1/3 Type) Exview HAD CCD II Total/Effective Pixels Number 520 000 Pixels / 480 000 Pixels 610 000 Pixels / 570 000 Pixels Horizontal Resolution 650 TV Lines (Color), 700 TV Lines (B/W) - Page 37 Specification Item LCD5300R-BN LCD5300R-BP SmartIR IR Anti-Saturation BACKLIGHT BLC / HSBLC / OFF 2D + 3D-DNR Exposure ALC /ELC Auto Gain Control OFF/ LOW/ MIDDLE/ HIGH Electronic Shutter Speed 1/60 to 1/120 000 1/50 to 1/120 000 Digital Zoom Sens-up OFF / AUTO(x2, ...
- Page 38 Specification Item LCD5300R-BN LCD5300R-BP Operation Temperature/ -10 ºC to 50 ºC / 0 % RH to 80 % RH Humidity Storage Temperature/ Humidity -20 ºC to 60 ºC / 0 % RH to 85 % RH Dimension (Ø x H)