Table of Contents
Advertisement
Chapter 8
8. 5. 2.
Configure the DHCPv6 Server Address Type
1. Visit http://tplinkwifi.net, and log in with the password you set for the Controller.
2. Go to
Settings
>
3. Select
IPv6
to configure IPv6 LAN parameters.
1 ) Select the
addresses to hosts.
2 ) Specify the
generate IPv6 addresses within the specified range.
3 ) Keep
Address Lease Time
4 ) Keep
Site Prefix Type
specific IPv6 site prefix, select
5 ) Keep
WAN Connection
4. Click
Save
to make the settings effective.
8. 6.
Set Up a Dynamic DNS Service Account
Most ISPs (Internet service providers) assign a dynamic IP address to the router and
you can use this IP address to access your router remotely. However, the IP address
can change any time and you don't know when it changes. In this case, you might need
the DDNS (Dynamic Domain Name Server) feature on the router to allow you and your
friends to access your router and local servers (FTP, HTTP, etc.) using domain name, in
no need of checking and remembering the IP address.
Note: DDNS does not work if the ISP assigns a private WAN IP address (such as 192.168.1.x) to the router.
To set up DDNS, please follow the instructions below:
Advanced Settings
DHCPv6 Server
address type to make the Controller assign IPv6
Start/End IPv6 Address
as default.
as the default value Delegated. If your ISP has provided a
as the default setting.
>
DHCP
Server.
for the IPv6 suffixes. The Controller will
Static
and enter the prefix.
Customize Your Network
52
Hide quick links:
Advertisement
Table of Contents
