Chapter 1
LED Explanation
Name
(Wireless)
(Sync/WPS)
1. 2. 2.
Buttons and Ports
Status
Indication
The wireless function is enabled, and the device is in the
Flashing Green
factory default state.
The wireless connection between Controller and Satellite is
Solid Green
successful, and the signal is strong.
The wireless connection between Controller and Satellite is
Solid Orange
successful, but the signal is weak.
Wireless connection between Controller and Satellite failed.
Solid Red
The wireless function is disabled.
Off
A Satellite is trying to connect to the Controller via WPS. This
Flashing Green
process may take up to 2 minutes.
A Satellite is trying to connect to the Controller via
synchronization. This process may take up to 2 minutes.
After successful connection, the LED will turn off. If the
Solid Green
synchronization fails, the LED will flash for about 10 seconds
and then turn off.
No WPS/Sync in process or WPS/Sync process has
Off
completed.
Sync
Get to Know Your Devices
4