Configure Dhcp Server - TP-Link M7300 User Manual

Chapter 7
• Manual: When you have selected Manual, click
Fi will scan for mobile networks. You can choose a network with better
performance to connect to. The mobile carrier providing the network
must be or have cooperation with your SIM card provider.
1. On your computer or tablet, visit http://tplinkmifi.net, and log in with the
password you set for the Mobile Wi-Fi.
2. Go to Advanced
3. Select Auto or Manual
4. Click Save.
7 4

Configure DHCP Server

The Mobile Wi-Fi acts as a DHCP (Dynamic Host Configuration Protocol) server,
dynamically assigning TCP/IP parameters to devices from the IP Address pool.
You can change the settings of the DHCP server if necessary.
1. On your computer or tablet, visit http://tplinkmifi.net, and log in with the
password you set for the Mobile Wi-Fi.
2. Go to Advanced
3. Enter a new IP address in the
default. And enter the starting and ending IP addresses in the
Address fields respectively.
Note:
1. The Start and End IP Addresses should be on the same network segment as the IP address you have
entered.
2. If you have changed the IP address of your Mobile Wi-Fi, you should use the new IP address or
http://tplinkmifi.net to log into the web management page.
> Dial-up > Network
for Network Search
> DHCP Server.
IP Address
Search
Settings.
as needed.
field and leave the
Customize Your Network
and the Mobile Wi-
Subnet Mask as
Start and End IP
39