Advertisement
3
Inside of Enclosure
Enclosure Wall
or Outlet Plate
Min. thickness - .035" (20 guage)
Max. thickness - .090"
Insert Bulkhead into prepared opening from outside of
enclosure. Secure with Keyed Thrust Washer and Nut
on the inside of enclosure. Torque Nut to 20 in-lbs.
5
Click
Properly orient jack as shown and insert
into Bulkhead until it clicks into position.
* Denotes revision level of Instruction Sheet.
For Technical Support: www.panduit.com/resources/install_maintain.asp
INSTALLATION INSTRUCTIONS
Installation for Industrial Jack
Outside of Enclosure
Page 2 of 4
PN318F
4
UTP Jack
(For CJI5E88T)
Terminate jack.
See PANDUIT Instruction Sheet PN120* for jack
Termination Instructions.
(Enclosure wall removed from views for clarity)
6
7
Tethered Cap option for sealing Industrial
Jack when not in use with Industrial Plug.
(OR)
Shielded Jack
(For CJSI5E88T)
Advertisement
