National Instruments NI 9683 User Manual And Specifications page 5

Mating the NI 9683 to the NI sbRIO-9605/9606
Figure 6 shows how to mate the NI 9683 to the NI sbRIO-9605/9606. Ensure that the
NI sbRIO-9605/9606 is powered off before connecting the NI 9683.
Caution
the NI sbRIO-9605/9606 to properly seat the sbRIO mezzanine connectors and
prevent damaging the device.
Figure 6. Mating the NI 9683 to the NI sbRIO-9605/9606
4
1 4-40 × 0.250 in. Screw (×8)
2 NI sbRIO-9605/9606
The screws include a nylon patch to prevent them from loosening when
Note
subject to vibration. NI recommends using a 3/16 in. socket and Phillips screwdriver
when mating the NI 9683 to the NI sbRIO-9605/9606 to ensure the screw installs in
the standoff correctly.
You must use the standoffs specified below when mating the NI 9683 to
1
2
3
1
NI 9683 User Guide and Specifications | © National Instruments | 5
3 4-40 × 0.380 in. Standoff (×4)
4 NI 9683