To Make Input Connections - Keysight Technologies 34420A Service Manual

To Make Input Connections

Using the Cable Provided
Align the front panel connector and cable conductors, press in.Tighten coupling
nut.
The connector and cable are an integral part of the measurement system. For
NOTE
the highest accuracy, use the copper cable and connectors supplied by Keysight
Technologies.
The conductors may require occasional cleaning to remove oxides. Cleaning the
conductors is described on
The connector body and cable shield are connected to earth ground.
WARNING
Keysight 34420A Service Guide
page 137.
Quick Start 1
31