Troubleshooting; Warranty - Black+Decker FSMH1321 Manual

Voltage
Power
Tank Capacity
Weight
Voltage
Power
Tank Capacity
Weight
Voltage
Power
Tank Capacity
Weight
Voltage
Power
Tank Capacity
Weight
Voltage
Power
Tank Capacity
Weight
Voltage
Power
Tank Capacity
Weight

Troubleshooting

If your appliance seems not to operate properly, follow the
instructions below. If this does not solve the problem, please
contact your local BLACK+DECKER repair agent.
FSMH1321
V 220-240
ac
W 1300
ml 500
kg 2.7
FSMH1351SM
V 220-240
ac
W 1300
ml 500
kg 2.7
FSMH13151SM
V 220-240
ac
W 1300
ml 500
kg 2.8
FSMH1321J
V 220-240
ac
W 1300
ml 500
kg 2.7
FSMH1321JSM
V 220-240
ac
W 1300
ml 500
kg 2.8
FSMH1321JMD
V 220-240
ac
W 1300
ml 500
kg 2.8
(Original instructions)
Problem Step
The steam mop is 1.
not turning on
2.
3.
The steam mop is not 4.
producing steam
5.
6.
The steam mop stops
7.
producing steam
during use
The steam mop is
8.
producing too much
steam during use
The steam mop is
9.
producing too little
steam during use
No steam is being
10.
produced from the
hand held steam
cleaner
11.
The hand held steam
12.
cleaner is producing
too little steam during
use
13.
The hand held steam
14.
cleaner is producing
too much steam
during use
The accessories keep
15.
falling off the unit
Steam is escaping
16.
from unexpected
areas of the unit
Where can I get
17.
further information/
accessories

Warranty

BLACK+DECKER is confident of the quality of its products
and offers an outstanding warranty.
This warranty statement is in addition to and in no way
prejudices your statutory rights.
If a BLACK+DECKER product becomes defective due to
faulty materials, workmanship or lack of conformity, within 24
months from the date of purchase, BLACK+DECKER
warranty to replace defective parts, repair products subjected
to fair wear and tear or replace such products to ensure
minimum inconvenience to the customer unless:
ENGLISH
Possible solution
Check the unit is plugged in at the
wall socket.
Check the unit is switched on using
the ON/OFF switch (1)
Check the fuse in the plug.
The steam mop will only produce
steam if the hand held steam cleaner
(5) is correctly docked into the main
body (11) or the steam hose is fitted
TM
or the Autoselect is turned to ON
Check that the water tank is full. Note:
When first filled or after running dry it
can take up to 45 seconds for steam
to be produced.
Check steps 1, then 2, then 3
Check steps 4, then 5, then 3
Turn the Autoselect TM dial (2)
anti-clockwise to reduce the amount
of steam being produced
TM
Turn the Autoselect dial (2)
clockwise to increase the amount of
steam being produced
Check that the Autoselect TM dial (2)
is at the ON position
Check steps 5, then 1, then 2, then 3
Turn the Autoselect TM dial (2)
clockwise to increase the amount of
steam being produced
Check step 5
TM
Turn the Autoselect dial (2)
anti-clockwise to reduce the amount
of steam being produced
Refer to the assembly chapter for
correct fitting instructions of all parts
and accessories
Refer to the assembly chapter for
correct fitting instructions of all parts
and accessories
www.blackanddecker.co.uk/steammop
www.blackanddecker.ie/steammop
13