Display Options; Before Starting The Measurement - Wohler TI 410 Operating Manual

5

Display options

Fig. 2: Temperature indication
sensitivity step 1
Fig. 5: Bar indication
Hold function
6 B efore starting the
measurement
Fig. 3: Temperature indication
sensitivity step 2
Fig. 6: Temperature unite,
Fahrenheit
Before starting the measurement, test the opera-
tiona l capability of your device:
•
Carefully
cloth or a
•
Breathe on the sensor plate
NOTE!
Breathe through your nose (Filter)
The device should now respond to sensitivity step 4
(see chapter 7.2)
NOTE!
Before switching on the device, the temperature of
the sensor plate should not be higher than the
room temperature.
Fig. 4: Bar indication
Fig. 7: Initial picture with
battery symbol, bar indica-
tion, both temperature units
and hold function
clean the sensor plate with a dry
ceton
Display options
21
EN