Condensing Dry; To Use Dryer In Condensing Mode; Venting Dry; Connecting The Dryer Vent Duct - Equator Super Combo EZ 4400N Owner's Manual

To use dryer in Condensing Mode:

1. Ensure metal vent cap (1) is installed on exhaust fan.
2. Press "Dry Only" button to set the machine on drying cycle.
3. Hold venting/condensing button for 5 seconds
4. symbol will appear on the screen which confirms that
the machine is in condensing mode.
5. Press start to run dryer in condensing mode
Condensing dry uses cold water to dry the clothes. The cold
water mixes with the hot air in a condensing chamber within the machine.
Please ensure the cold water faucet is open during condensing dry mode.
Note: Slight condensation can occur at soap dispenser and will evaporate.
This is a normal feature.
To use dryer in Venting mode:
1. Ensure metal vent cap on exhaust fan located at the back is removed .
2. Press "Dry Only" button to set the machine on drying cycle.
3. Hold venting/condensing button for 5 seconds
4. symbol will appear on the screen which confirms that the machine is in venting mode.
5. Press start to run dryer in venting mode

CONDENSING DRY

VENTING DRY

12