Configuration - GE eBike with Control Terminal PC Operator's Manual

P C - O p e r a t i o n
E r g o m e t r y
M a n u a l
S e t t i n g s
S e l e c t
Figure 6-1 Main menu
S e t t i n g s
D e f a u l t M o d e
P r o g r a m s
C o n t r a s t
L o a d c h a n g e
L a n g u a g e
S e l e c t
Figure 6-2 Configuration menu
D e f a u l t M o d e
M e n u
P C - O p e r a t i o n
E r g o m e t r y
M a n u a l
S e l e c t
Figure 6-3 Default Mode menu
2018112-001 Revision B

Configuration

6 Configuration
Some Basic Facts
A number of device settings can be configured to suit
your needs and preferences. The device will save your
selections and automatically activates them when it is
turned on again.
Using the right and left softkeys in the main menu,
position the bar cursor on Settings, then press the
softkey in the middle to Select the option.
The configuration menu appears (Figure 6-2).
Using the right and left softkeys, position the bar
cursor on the parameter to change and Select the
option.
Having completed the changes, exit the configuration
menu with
The device may be configured to default to one of
the operating modes. In this case you will see the
initial screen of the selected operating mode instead
of the main menu. You can display the main menu
with the
"Configuration").
– Upon delivery, the ergometer is configured for
communication with digitally controlled
electrocardiographs.
– When you operate the ergometer in conjunction
with the MAC 5000 ST (analog control), select
"PC Operation" in the "Default Mode" menu
and "Analog/Digital" in the "EKG-Typ" menu.
Default Mode
In this menu you choose the default mode activated when
the ergometer is turned on.
Using the arrow buttons, choose an operating mode,
then Select the option to exit the menu.
Quit the configuration mode with
eBike with Control Terminal PC
.
Note
button (see section 6
Note
.
21