GE eBike with Control Terminal PC Operator's Manual page 54

2 5
W a t t m i n
/
m m H g
+ 5 W R e c o v e r .
Figure 4-6 Ergometry mode
2 5 1 6
W a t t m i n
/
m m H g
+ 5 W E n d
Figure 4-7 Recovery phase
18
Running an Exercise Test
1 5 8
/ m i n
/ m i n
- 5 W
5 8
/ m i n
/ m i n
- 5 W
eBike with Control Terminal PC
Adjustments During the Exercise Test
After the test has begun, the displayed information will
change (Figure 4-6). Now you can increase or decrease
the load with the right and left softkeys (increments
configurable between 1 and 25 W) or advance to the
recovery phase with the softkey in the middle.
Ending the Test
The test ends automatically when all stages including the
recovery phase have been completed. It is also possible to
end the test manually at any time. If you wish to abort the
test, press the softkey in the middle to advance to the
recovery phase (Figure 4-7).
During the recovery phase, the patient continues to pedal.
The load during recovery is reduced to a preset value.
However, you can increase or decrease the load
manually.
With the softkey in the middle you End the test.
2018112-001 Revision B