OPERATION
Before using the appliance for
the first time
•
Remove packaging, clean the interior
of the oven,
•
Take out and wash the oven accessories
with warm water and a little washing-up
liquid,
•
Turn on the ventilation in the room or
open a window,
•
Heat up the oven (to a temperature of
250°C for approximately 30 minutes),
remove any stains and wipe the interior
carefully. (see section: Using the control
panel),
Important!
To clean the oven chamber use only
warm water and a small amount of
washing-up liquid.
Important!
The oven features touch control panel
and display. To activate each touch
sensor, touch the glass above the
sensor (indicated by a pictogram). An
acoustic signal will be heard.
On/off switch
of the display. To activate each touch
sensor, touch the glass above the
sensor (indicated by a pictogram). An
acoustic signal will be heard, which
was selected in the menu. (See sec-
tion: Using the control panel),
Touch sensor surfaces must be
kept clean.
12
is on the right side
Need help?
Do you have a question about the IO 9600-90 X and is the answer not in the manual?