Table of Contents
Advertisement
Miscellaneous
10. Tint (Command 2 : j)
G To adjust the screen tint.
You can also adjust tint in the PICTURE menu.
Transmission
[k][j][ ][Set ID][ ][Data][Cr]
Data Red : 0 ~ Green : 64
* Refer to 'Real data mapping 1'. See page 28.
Ack
[j][ ][Set ID][ ][OK][Data][x]
11. Sharpness (Command 2 : k)
G To adjust the screen sharpness.
You can also adjust sharpness in the PICTURE menu.
Transmission
[k][k][ ][Set ID][ ][Data][Cr]
Data Min : 0 ~ Max : 64
* Refer to 'Real data mapping 1'. See page 28.
Ack
[k][ ][Set ID][ ][OK][Data][x]
12. OSD Select (Command 2 : l)
G To select OSD (On Screen Display) on/off when con-
trolling remotely.
Transmission
[k][l][ ][Set ID][ ][Data][Cr]
Data 0 : OSD off
Ack
[l][ ][Set ID][ ][OK][Data][x]
13. Remote control lock mode (Command 2 : m)
G To lock the front panel controls on the set and remote
control.
Transmission
[k][m][ ][Set ID][ ][Data][Cr]
Data 0 : Lock off
Ack
[m][ ][Set ID][ ][OK][Data][x]
* If you're not using the remote control, use this mode.
When main power is on/off, external control lock is
released.
14. PIP / DW (Command 2 : n)
G To control the PIP (Picture In picture)/DW.
You can also control the PIP/DW in the PIP/DW menu.
Transmission
[k][n][ ][Set ID][ ][Data][Cr]
Data 0: PIP/DW off
1: PIP
Ack
[n][ ][Set ID][ ][OK][Data][x]
26 PLASMA TV
1 : OSD on
1 : Lock on
2: DW1
3: DW2
15. PIP Position (Command 2 : q)
G To select sub picture position for PIP.
You can also adjust the sub picture position in the PIP/DW
menu.
Transmission
[k][q][ ][Set ID][ ][Data][Cr]
Data 0 : Right down on screen
1 : Left down on screen
2 : Left up on screen
3 : Right up on screen
Ack
[q][ ][Set ID][ ][OK][Data][x]
16. Treble (Command 2 :r)
G To adjust treble.
You can also adjust treble in the SOUND menu.
Transmission
[k][r][ ][Set ID][ ][Data][Cr]
Data Min : 0 ~ Max : 64
* Refer to 'Real data mapping 1'. See page 28.
Ack
[r][ ][Set ID][ ][OK][Data][x]
17. Bass (Command 2 : s)
G To adjust bass.
You can also adjust bass in the SOUND menu.
Transmission
[k][s][ ][Set ID][ ][Data][Cr]
Data Min : 0 ~ Max : 64
* Refer to 'Real data mapping 1'. See page 28.
Ack
[s][ ][Set ID][ ][OK][Data][x]
18. Balance (Command 2 : t)
G To adjust balance.
You can also adjust balance in the SOUND menu.
Transmission
[k][t][ ][Set ID][ ][Data][Cr]
Data Min : 0 ~ Max : 64
* Refer to 'Real data mapping 1'. See page 28.
Ack
[t][ ][Set ID][ ][OK][Data][x]
19. Colour Temperature (Command 2 : u)
G To adjust colour temperature.
You can also adjust CSM in the PICTURE menu.
Transmission
[k][u][ ][Set ID][ ][Data][Cr]
Data 0: Cool
1: Normal
Ack
[u][ ][Set ID][ ][OK][Data][x]
2: Warm
3: User
Advertisement
Table of Contents
