Installation - TANDBERG 770 MXP User Manual

2 Installation

Precautions:
 Never install communication wiring during a lightning storm.
 Never install jacks for communication cables in wet locations unless the jack is
specifically designed for wet locations.
 Never touch uninstalled communication wires or terminals unless the telephone line has
been disconnected at the network interface.
 Use caution when installing or modifying communication lines.
 Avoid using communication equipment (other than a cordless type) during an electrical
storm. There may be a remote risk of electrical shock from lightning.
 Do not use the communication equipment to report a gas leak in the vicinity of the leak.
 Always connect the product to an earthed socket outlet.
 The socket outlet shall be installed near to the equipment and shall be easily accessible.
 Never install cables without first switching the power OFF.
 1TR6 network type is not approved for connection directly to the telecommunications
network. This network type is only to be used behind a PABX.
 This product complies with directives: LVD 73/23/EC, EMC 89/366/EEC, R&TTE
99/5/EEC
17