Removing & Installing Body Components
Battery
Negative terminal
Screw
Bolts
Battery holder
44
Screw
Positive terminal
Fuse holder
Battery
#
Removal
Make sure the ignition switch is in the
position.
1. Remove the right side cover.
2. Remove the fuse holder from the battery
holder.
3. Disconnect the negative
the battery.
4. Disconnect the positive
the battery.
5. Remove the battery holder by removing
the bolts.
6. Remove the battery taking care not to drop
the terminal nuts.
Pull out the battery and battery holder
u
together from motorcycle.
(off)
P. 48
2
terminal from
-
terminal from
+