Honda TMX SUPREMO Series Owner's Manual page 57

3. Place your motorcycle on its centre stand
on a firm, level surface.
4. Place a drain pan under the drain bolt.
5. Remove the oil fill cap/dipstick, drain bolt
and sealing washer to drain the oil.
Discard the oil at an approved
u
recycling centre.
Sealing washer
Drain bolt
Engine Oil
6. Install a new sealing washer onto the drain
bolt. Tighten the drain bolt.
Torque: 30 N·m (3.1 kgf·m, 22 lbf·ft)
7. Fill the crankcase with the recommended
oil ( P. 36, 99) and install the oil fill cap/
2
dipstick.
Required oil
When changing oil:
1.0 litres (1.06 US qt, 0.88 Imp qt)
8. Check the oil level.
9. Check that there are no oil leaks.
Changing Engine Oil
u
P. 51
2
53