Data Port - TANDBERG 6000 MXP Profile User Manual

TANDBERG 6000 MXP Profile
5.1.4

Data port

The data port(s) are implemented as Data Communications Equipment (DCE). The connector
used are female 9-pin D-subs.
The TANDBERG main camera is normally connected to data port 2 and pin number 4 provides
12V DC / 1 Amps to the main camera. Otherwise the pin-outs for both data ports are the same.
Signal name Direction
Carrier detect, CD From
DCE
Receive data, From
RXD DCE
Transmit data, To DCE
TXD
Data terminal From
ready, DTR DCE
Signal ground,
GND
Data set ready, From
DSR DCE
Ready to send, To DCE
RTS
Clear to send, From
CTS DCE
Ring indicator, RI From
DCE
230
Pin
number
1
2
3
4
5
6
7
8
9