TANDBERG 6000 MXP Profile User Manual page 221

Levels:

Composite: 1 Vpp, 75 ohm

S-Video (Y/C):

Y: 1 Vpp, 75 ohm

C (PAL): 0.3 Vpp, 75 ohm

C (NTSC): 0.28 Vpp, 75 ohm
VGA formats supported on 'DVI-I out':
SVGA (800x600) 75Hz
XGA (1024x768) 60Hz
WXGA (1280x768) 60Hz
HD720p (1280x720) 50,60 Hz
DVI and specifications:
DVI stands for Digital Video Interface, and is a form of video interface technology made to
maximize the quality of flat panel LCD monitors and high-end video graphics cards.
The TANDBERG codec contains a DVI-I plug that can transmit either digital DVI signals or
standard analog VGA signals, depending on what type of monitor is connected.
DVI Specifications
TANDBERG DVI-I follows the VESA Monitor Timing Standard v1.08, also knows as Display
Monitor Timing (DMT).
Analog Horizontal
Frequency
800x600 @ 46.875kHz
75Hz
1024x768 48.363kHz
@ 60Hz
Digital
800x600 @ 46.875kHz
75Hz
1024x768 48.363kHz
@ 60Hz
DVI-I Video resolution supported in F1 and above
The resolution used when showing a PAL image like the WAVE II is:

800x600 @ 75Hz.
The resolution used when showing a NTSC image like the WAVE II is:

1024x768 @ 60Hz.
Supported DVI cables:
TANDBERG supports DVI-D Single-Link, DVI-A and DVI-I Single-Link format cables.
Vertical Pixel
frequency Clock
75.00Hz 49.50MHz
60.004Hz 65.00MHz
75.00Hz 49.50MHz
60.004Hz 65.00MHz
Peripheral Equipment
221