TANDBERG 6000 MXP Profile User Manual page 133

SVGA 800x600
VGA output format is forced to SVGA format (800x600) 75Hz
75Hz
XGA 1024x768
VGA output format is forced to XGA format (1024x768) 60Hz
60Hz
VGA Out Quality for Wide XGA:
If VGA Monitor Format is set to Wide, PC Picture Format is set to Normal, VGA Out
Quality is set to Auto, the layout on the monitor is either fullscreen or POP, and the
input source to the largest window is PC with resolution 1024x768, the system will use
WideXGA (1280x768) instead of XGA, when the monitor supports this.
PC Picture Format (wide screen monitors only)
PC Picture Format setting only takes effect when TV or VGA Monitor Format is set to Wide. Use
this setting to determine if you want your PC presentations to be shown stretched in full screen,
or with correct aspect ratio using part of the widescreen display. With the VGA Out Quality set to
Auto the presentation will be of the best possible quality supported by the monitor.
Normal VGA output will have 4:3 aspect ratio on wide screen monitor.
Wide VGA output will utilize the wide screen monitor at full.
PC presentation shown in Normal (correct ratio) mode.
PC Presentation shown in Wide (stretched) mode.
Administrator Settings
133