Basic Information And Preparation; Instant Stack; Intellectual Stack And Simple Stack; Remote Control For Intellectual Stack And Simple Stack - Hitachi CP-X4021N User Manual

1.3 Basic information and preparation

Instant Stack

Instant Stack is the feature that brings you very convenient way to superimpose
the images projected by two projectors. The projector is specially designed to
support the feature, and has some functions to support you to install two projec-
tors and superimpose the images.

Intellectual Stack and Simple stack

Instant Stack covers both of the following two features.
If you link two projectors with an RS-232C cable and make necessary setting on
the projectors, the projectors will automatically collaborate to work under the set-
ting. This use is called as
If you do not connect an RS-232C cable, the projectors will work individually. This
use is called as Simple Stack

Remote control for Intellectual Stack and Simple Stack

In Intellectual Stack
( 18 ) If you use
Intellectual
remote control signal. Even if you want to operate the other as
point at the Main with the remote control.
If you use Simple Stack, both projectors can receive the remote control signal. To
avoid the operation by the remote control to being mixed up, it is recommended to
operate one projector by the remote control and to operate the other by the con-
trol panel on the projector or wired remote. In this case the other projector should
disable the remote control by

Installation styles

There are following two styles to install two projectors.
both of them.
Style 1 : Piling them up vertically
Style 2 : Lining them up horizontally
This manual is mainly explained the installation of
two projectors in Style

Tentative naming of two projectors

To be easy to follow the explanation, the following
names are used in the manual for piling up installa-
tion.
Set A : A projector placed underneath
Set B : A projector placed over
All manuals and user guides at all-guides.com
Intellectual Stack
in this manual.
use, one projector is set as
Stack, only the projector as
KEY LOCK.
2, refer to the articles you need in this manual.
Set A
in this manual.
Main and the other is set as Sub.
Main
(Operating Guide
Instant Stack
Style 1. If you wish to install
Set
Set
6
Introduction
can receive the
Sub , you need to
→ OPTION menu)
can support
B
A