Installation of the first projector (Set A) - Setting up Set A
6.
Use the ▲/▼ buttons to point at
MODE, and press the ► button to display
STACK MODE
Point at
SUB
pressing the ▲/▼ buttons, and
press the ► button.
7.
After pressing the ► button, a dialog to
confirm whether or not the setting is saved is
displayed.
Press the ► button to complete the setting. ( 23 )
8.
Disable the remote control by
(Operating Guide
NOTE
• During the installation,
control after that. So, it is recommended to disable the remote control by
LOCK, to avoid the operation by the remote control to being mixed up.
• After
STACK MODE
remote control signal. When you set
remote control by
All manuals and user guides at all-guides.com
STACK
dialog.
KEY LOCK
→
OPTION
menu)
Set A
setting is completed,
KEY LOCK
if necessary.
(continued)
if you use
Intellectual
will not be operated by the remote
Set A
(Sub) cannot receive the
STACK MODE
to OFF, enable the
10
Installation
Stack.
KEY