Hitachi CP-X4021N User Manual page 37

Troubleshooting (continued)
Phenomenon
The settings on projectors are not set for
Intellectual Stack
Check the following settings on
projectors.
STACK menu
-
cannot be
operated.
-
-
The remote control points at Sub projector.
Projector does
When the projector is working on
not react the
Stack, only
remote control.
remote control signal. So, point at
projector when you use the remote control.
Two images are not superimposed
correctly.
Images are
Adjust
not overlapped
HORISONTAL
properly or
superimpose them.
defocused.
If necessary, also adjust
KEYSTONE.
There is something different on adjustment
between two images.
Try to resolve it with the following measures.
Though you try a
- Press
fine adjustment,
the images from
two projectors
- Adjust
are not
superimposed.
- Check
All manuals and user guides at all-guides.com
Cases not involving a machine defect
feature.
STANDBY MODE
NORMAL
COMMUNICATION TYPE
COMMUNICATION
OFF
STACK LOCK in SECURITY
Main projector can receive the
ZOOM VERTICAL
ring,
adjuster and
AUTO button of the remote control or
execute AUTO ADJUST EXECUTE
of the projectors.
H POSITION
each of the projectors.
RESOLUTION
menu, and if it is different between the two
projectors, make it same.
Main and
in SETUP menu:
in
in SERVICE menu:
menu: OFF
Intellectual
Main
adjuster,
FOCUS ring to
PERFECT FIT
on each
and V POSITION
setting on INPUT
37
Troubleshooting
Reference
page
Sub
7
6
8
15
and
24
in
Operating
Guide
on
38
in
Operating
Guide
42
in
Operating
Guide