Table of Contents
Advertisement
4.8.5 Analog Output 2
tYP. 2
ANLG
•1
C. 1 0
AN2. A
NONE
•1
C. 1 1
AN2H
20. 0
•1
C. 1 2
AN2. L
4. 0
•1
C. 1 3
r2H
•2
100. 0
•1
C. 1 4
r2L
•2
0. 0
rLY1
NONE
•1
Only displayed if optional ouput is fitted. If the output is assigned to a control output by the control type, the
setting displayed cannot be changed – see Section 4.2, Basic Configuration/ Control Output Type.
•2
Not applicable if analog output 2 is assigned to a control output.
Analog Output 2 (ao2) Assignment Source
Select the source required to activate Analog Output 2
See Rear Fold-out/ Table D – Analog Sources.
Analog Output 2 (ao2) Electrical High
The maximum current output required for the retransmission range.
[0.0 to 20.0mA]
Analog Output 2 (ao2) Electrical Low
The minimum current output required for the retransmission range.
[0.0 to 20.0mA]
Retransmission 2 Engineering High
The engineering range value at which maximum output is required.
[In engineering units]
Retransmission 2 Engineering Low
The engineering range value at which minimum output is required.
[In engineering units]
Continued...
4 CONFIGURATION MODE...
C10...C14
73
Advertisement
Table of Contents
