Sony PCM-3348HR Installation Manual page 11

(4) Insert the supplied power cord into the remote control
unit's AC inlet and plug holder. Pass the cord through
the supplied wire stopper. Secure the wire stopper to
the rear of the top plate with the supplied screw (+B4
x 8).
Power cord
(5) Secure the power cord with the cord clamp located at
the bottom of the top plate.
Cord clamper
2Lock.
PCM-3348HR
AC inlet
Plug holder
(Supplied)
Wire stopper
+B4 x 8
1Insert the
remote cable.
1-4. Installing the Remote Control Unit on the Remote Stand
(6) Secure the remote cable and the power cord with the
cord clamp on the leg.
Cord clamper
Assembled Unit
2 Insert the power cord.
1 Insert the remote cable.
3 Lock.
Leg assy
1-7