Assembly & Disassembly Of Side Cleaning Brush; Cleaning Of Brush And Floor Brush; Assembly & Disassembly And Cleaning Of Left/Right Wheel And Front Wheel; Assembly & Disassembly And Cleaning Of Left/Right Wheel - Fakir ROBERT-L Operating Instructions Manual

GB
Assembly & Disassembly of Side Cleaning Brush:
1. Release the screw in the main shaft of the
side brush before changing the side
brush.
2. Press the side brush against the main
shaft and then fasten the screw. (Refer to
the figure)

Cleaning of Brush and Floor Brush:

1. Clear the hair or big dust particles on the
brush and floor brush regularly to improve
the cleaning performance. Clean the dust
at the air intake. Clean the wastepaper or
small particles by dust brush directly.
Rotate the brush carefully and cut by
scissors or pull by hand the hair, yarn and
other twisted objects.
2. The cleaning of the brush and floor brush
can be done by reference to the assembly
& disassembly.
9-3. Assembly & Disassembly and Cleaning of Left/Right Wheel and Front Wheel:
Assembly & Disassembly and
Cleaning of Left/Right Wheel:
1. Release the screw of the left/right
wheel by the screwdriver. (Refer to
Figure 1)
2. Take out the left/right wheel and clean
them with the brush (Refer to Figure
2). Don't wash them in water!
3. Place the left/right wheel in the
original position, and tighten the
screw while assembling.
78
ROBERT-L
Figure 1
Figure 2