Installation Of Battery; Battery Installation Of The Cleaner; Battery Installation Of The Space Isolator; Battery Installation Of The Remote Control - Fakir ROBERT-L Operating Instructions Manual

GB

4. Installation of Battery:

Battery installation of the Cleaner:

1. Release the screw with a screwdriver,
open its base plate. (Refer to Figure 1 )
2. Connect two terminals during battery
installation. (Refer to Figure 2)
3. Place the positive and negative poles
correctly for fear of the damage due to
wrong poles.
4. Set the cleaner in charging status to keep
the best performance of the battery while
the cleaner is not in use.
5. Ensure using the original battery of the
manufacturer for installation, otherwise
there may be damage or accident.

Battery installation of the Space Isolator:

1. spin the pivot as per figure 1 and the
cover will open.
2. Please place the batteries (not included)
with correct polarity (+/-) (Refer to
Figure2)
3. The right place of battery. (Refer to
Figure 3)
4. Please take out the battery if it was
unused for long.

Battery installation of the remote control:

1. Open the battery cover and then replace
the battery. (Refer to Figure 1)
2. Please place the batteries (not included)
with correct polarity (Refer to Figure 2)
3. Please take out the battery if it was
unused for long.
1. Please don't forget to take out the battery before discarding the Cleaner.
2. Please remember to turn off the switch before taking out the battery from the
Cleaner and Space Isolator.
3. Please don't place the battery in the high-temperature environment above
45 ºC or in the water.
4. Please don't exert external force to the battery or drop them from high place.
5. The battery should be recycled with safe disposal. Please don't discard it
freely or throw it into fire for fear of explosion!
64
ROBERT-L
Figure 1
Figure 1
Figure 3
Figure 2
Figure 2