Table of Contents
Advertisement
DPN-1021G GPON ONT VoIP Gateway with 1 GPON
Port, 1 10/100/1000Base-T Port, 1 10/100Base-TX Port,
and 1 FXS Port
User Manual
Parameter
Disable Hot Line
Enable Hot Line
Enable alarm clock
Disable alarm clock
To change parameters of a code, select the relevant line in the table.
Figure 81. The VoIP / Call Feature Codes page. The window for editing the code parameters.
In the opened window, specify the needed parameters:
Parameter
VSC
Line 1
Line 1
Click the SAVE button.
When all needed settings are configured, click the APPLY button.
Disables the hotline.
Enables the hotline.
Enables the alarm clock for the time specified for this
line.
Disables the alarm clock.
The value of the code. If the code ends with * (the asterisk key),
further you can enter a value for the function in use (a number for
call forwarding or time for the alarm clock). For example, the code
for enabling the alarm clock: *55*HHMM#, where HHMM is time
in 24-hour format.
Edit from Phone
Move the switch to the right to enable the code for the phone
connected to the FXS port of the gateway.
Move the switch to the left to disable the code for this phone.
Sending to server
Move the switch to the right to inform the SIP server when a user
dials the code on the phone.
Move the switch to the left if the server should not be informed.
Page 111 of 145
Configuring via Web-based Interface
Description
Description
Advertisement
Table of Contents
