Power Plate Roller Quick Start Manual

CONTROLS & FUNCTIONS
Controls
Power
Button
Pressing the Power Button once will display the battery
life of the Roller indicated by the Dual Purpose LED
TM
Indicators. Pressing the Power Button a second time
will cause the Roller to turn on and begin vibrating at
intensity level 1. Each additional press of the Power
Button will advance vibration to the next intensity level.
At level 4, the Roller enters Oscillation Mode, where it
will cycle between vibration intensity levels. A sixth
press will turn the Roller off. To save battery life, the
Roller's internal ten-minute automatic safety shut-off will
trigger if the product has been running continuously for
a full ten minutes.
ONE PRESS TWO PRESSES
Displays current Starts vibration at
battery life intensity level 1
THREE PRESSES FOUR PRESSES
Advances to vibration Advances to vibration
intensity level 2 intensity level 3
FIVE PRESSES SIX PRESSES
Advances Roller to Turns Roller off
Oscillation Mode
S
Dual Purpose
LED Indicators
Battery Meter
& Vibration
Intensity
For exclusive content, trainer insights and
USB
Charging more ways to use your Power Plate product,
Port
download the Power Plate App today.
1-YEAR WARRANTY
The Power Plate
1-year limited manufacturer's warranty.
To register your product, please visit online
at powerplate.com/products/registration
@PowerPlateUSA
info@powerplate.com
powerplate.com
WARNINGS: The
product should not be used near
any source of water. Contact with water could cause a
short-circuit, which could cause personal injury or damage to the
product. The device is not suitable for use in the presence of flammable anesthetic
mixtures with air or with oxygen or nitrous oxide. The user must check that the equipment
functions safely and see that it is in proper working condition before being used. Overuse
may cause minor bruising for some individuals; if this occurs use should be curtailed until
symptoms are reduced. Permissible environmental conditions of use including conditions
for transport and storage.
PRODUCT LIMITED WARRANTY SUMMARY: To register your product, please visit online at
powerplate.com/products/registration. Registering your product will help Performance
Health Systems, LLC (PHS) provide quicker and more efficient service and support.
Registering also ensures you will receive full advantage of the product warranty.
Performance Health Systems, LLC ("PHS") warrants this product to be free of defects in
material or workmanship for a period of 0ne (1) year from the original date of purchase. The
warranty is available only to the original purchaser and only if purchased directly from Power
Plate ® or through an authorized distributor or reseller. If the product is found to be defective
by PHS during the warranty period, PHS will, in its sole discretion, either repair or replace
the product with a new or factory reconditioned model. All consequential damages or
losses are waived by purchaser. NO OTHER WARRANTIES, EXPRESSED OR IMPLIED,
ARE GRANTED BY PHS EXCEPT AS PROVIDED BELOW.
Additional applicable sales terms, conditions and disclaimers are found at
powerplate.com/legal/sales-and-warranty-terms-and-conditions-of-sale-us
For sales and purchases outside of the United States, please refer to additional applicable
sales and warranty terms and conditions found at: powerplate.com/legal/warranty-terms-uk
Performance Health Systems
corporation. All rights reserved. Power Plate
registered trademarks of Performance Health Systems, LLC and/or its affiliated companies
in the United States and/or select foreign countries. Manufactured and distributed under
license from Performance Health Systems, LLC,.
Roller is backed by a
®
TM
® ©2019 Performance Health Systems, LLC, a Delaware
® Roller TM logo and product design are the
B
QUICK START GUIDE
C