Led Indicators - Dahua IPC-C26E Quick Installation Manual

Note:
Use the pry bar included in the packaging to open the top panel to access the Reset/WPS

Button and the SD Card slot.
Press the Reset/WPS button to enable WPS.

Press the Reset/WPS button for 10 seconds to reset the device to the factory settings.


LED Indicators

LED Indicator Light
Off
Steady Red
Flashing Red
Flashing Green
Steady Green
Alternating Flashing Red/Green
Device Status
Powered off.

Rebooting after reset.

Device malfunction. Try resetting the camera (see 'Camera
Overview' for details) and repeating the setup.
Network connection failed. Try resetting the camera (see
'Camera Overview' for details) and repeating the setup.
Waiting for network connection.
Operating normally.
Firmware updating.
2