Safety And Instructional Decals - Exmark Z-Plug Operator's Manual

Safety

Safety and Instructional Decals

• Keep all safety signs legible. Remove all grease,
dirt and debris from safety signs and instructional
labels.
• Replace all worn, damaged, or missing safety
signs.
• When replacement components are installed, be
sure that current safety signs are affixed to the
replaced components.
• If an attachment or accessory has been installed,
make sure current safety signs are visible.
126-2055
1. Wheel lug nut—torque to 129 N∙m (95 ft-lb).
2. Wheel hub nut—torque to 319 N∙m (235 ft-lb).
3. Read the Operator's Manual before performing
maintenance; check the torque after the first 100 hours
and every 500 hours after.
135-6430
1. Press and hold the foot
pedal to lock the caster
wheels in the straight
position.
decal126-2055
decal135-6430
2. Release the foot pedal to
unlock the caster wheels
to allow turning.
• New safety signs may be obtained from your
authorized equipment dealer or distributor.
• Safety signs may be affixed by peeling off the
backing to expose the adhesive surface. Apply
only to a clean, dry surface. Smooth to remove
any air bubbles.
• Familiarize yourself with the following safety signs
and instruction labels. They are critical to the safe
operation of your machine.
1. Cutting/dismemberment hazard of hand, spinner—stay
away from moving parts.
12
135-6725
decal135-6725