Table of Contents
Advertisement
All manuals and user guides at all-guides.com
DirectCD
TM
v2.5b(s)
Important Precautions
Follow these precautions when handling the drive or discs.
Precautions
• Please take notice that the manufacturer of this equipment does
• Please take notice that the manufacturer will bear no responsibility
• Please take notice that the manufacturer will bear no responsibility
• Please backup (copy) all important data as protection against
Installation
• Avoid placing the drive in a location subject to:
We recommend using the drive in a horizontal or vertical position.
Do not install the drive at an angle.
Operation
• Don't move the drive suddenly from a cold place to a warm one or
• Make sure to remove the disc before moving the drive. The disc
• Be careful to prevent foreign objects, such as liquids or metal,
• Don't interrupt the electric power while the drive is operating.
• When connecting two IDE devices to the Primary or Secondary
• The total length of the IDE cable should be no more than 18 inches
3
not offer any warranty against data loss due to inappropriate
installation or handling or direct or indirect damages.
for direct or indirect damages caused by the use of this product or
its malfunction.
for damage to data caused by this product.
data loss.
- high humidity
- high temperature
- excessive dust
- mechanical vibration
- direct sunlight
raise the room temperature suddenly. Condensation may occur,
causing abnormal operation.
may be damaged, causing data loss.
from entering the drive. In case a foreign object enters the drive,
please consult the dealer where the drive was purchased.
connectors, make sure that the two devices are not configured as
both Master, or both Slave. If they are both set the same, Windows
may fail to run or recognize the drives.
(about 45 cm).
Advertisement
Table of Contents
