Assembly Of Appliance - Fakir RISSOLE User Manual

Assembly of Appliance

• Place the appliance on a flat ground
• Press on the locking switch and attach the feeding tube. (Figure 1).
• Push the locking handle to the vertical position. (Figure 2).
• Place the shaft. (Figure 3).
• Attach as the sharp side of the blade will face forward, place it properly. (Figure 4).
• Place the grinding disk in the desired size on the blade so that their sockets are
placed on the feeding tube. (Figure 5).
• Attach the fixing ring and tighten it. Do not over-tighten it. (Figure 6).
• Place the tray and fasten it. (Figure 7).
Now the appliance is ready to use.
CAUTION!
If the parts are not attached properly, the meat may not be minced and may
damage the machine.
21
EN