Banner WLS27 Series Instruction Manual

WLS27 LED Strip Light - PWM Dimmable
Instruction Manual
Banner's WLS27 LED Strip Light has a sturdy aluminum housing and is encased in a shatterproof, UV-stabilized, copolyester shell, making it ideal
for harsh indoor and outdoor applications.
• Intensity can be controlled from 0 to 100% using Pulse Width Modulation (PWM) on an input control wire
• Rugged, water-resistant IP69K rating
• Available in eight lengths from 145 mm to 1130 mm
• Daisy chain power to multiple lights to control intensity simultaneously
• Automatic temperature protection built into the unit. Above 50 °C, th light dims to manage heat and protect product lifetime
For PWM dimming, use with the LC65 Dimmer Module. For more information, refer to the LC65 LED Dimmer Module
datasheet, p/n
Stand-Alone Light or End Light in a Cascade—QD
These Work Light Strips are available as either stand-alone models, or as cascade models that can be daisy-chained together for a continuous
length of lighting, with a minimum of wiring.
Stand-alone models have a male quick disconnect at one end for power connection and no connections at opposite end. A stand-alone model may
be used as the last in the cascade series.
Cascade models have a male quick disconnect at one end for power connection, and a female quick disconnect at the opposite end for connecting
to other lights in the cascade. A double-ended accessory cordset must be used between each pair of lights in a cascade.
Use single-ended cordsets between the power source and the QD connection of a stand-alone light or the first light in a cascade. Use double-ended
cordsets between lights in a cascade.
Important: Lea el siguiente instructivo antes de operar el luminario. Por favor descargue desde www.bannerengineering.com
toda la documentación técnica de los WLS27 LED Strip Light, disponibles en múltiples idiomas, para detalles del uso
adecuado, aplicaciones, advertencias, y las instrucciones de instalación de estos dispositivos.
Important: Lisez les instructions suivantes avant d'utiliser le luminaire. Veuillez télécharger la documentation technique
complète des WLS27 LED Strip Light sur notre site www.bannerengineering.com pour les détails sur leur utilisation correcte,
les applications, les notes de sécurité et les instructions de montage.
Models
Family
WLS27
C = Cascadable
X = Non-cascadable
Stand-Alone
WLS27XW145DSPWMQ
WLS27XW285DSPWMQ
WLS27XW430DSPWMQ
WLS27XW570DSPWMQ
WLS27XW710DSPWMQ
WLS27XW850DSPWMQ
WLS27XW990DSPWMQ
WLS27XW1130DSPWMQ
Original Document
186597 Rev. G
177086 .
Lighted
Length (mm)
Cascadable LED Color
C W 145
145
285
430
W = Cool white 570
710
WW = Warm white
850
R = Red
990
G = Green
1130
B = Blue
Y = Yellow
Cascade
WLS27CW145DSPWMQ
WLS27CW285DSPWMQ
WLS27CW430DSPWMQ
WLS27CW570DSPWMQ
WLS27CW710DSPWMQ
WLS27CW850DSPWMQ
WLS27CW990DSPWMQ
WLS27CW1130DSPWMQ
First or Middle of a Cascade—QD
Window Construction
D PWM
S
S = Sealed
D = Diffused plastic
PWM = Pulse Width Modulation Dimming
Lighted Length
145 mm
285 mm
430 mm
570 mm
710 mm
850 mm
990 mm
1130 mm
27 August 2019
Connector
Q
Q = Integral 4-pin M12 QD
(mating cordset required)
Power Connector
Integral 4-pin M12/Euro-style quick
disconnect
186597