Banner EZ-STATUS WLS27 Series Instruction Manual

EZ-STATUS WLS27 Multicolor LED Strip Light
Instruction Manual
Banner's WLS27 Multicolor LED Strip Light has a sturdy aluminum housing and is encased in a shatterproof, UV-stabilized, copolyester
shell, making it ideal for harsh indoor and outdoor applications.
• EZ-STATUS combines lighting and indication in one device to illuminate an area or machine, and show status change
• Models with 3 or 5 colors available, all with only 3 inputs
• Rugged, water-resistant IEC IP69K rating
• Four available lengths from 285 mm to 1130 mm
• Daisy chain power to multiple lights
Stand-Alone Light or End Light in a Cascade—QD
Available as stand-alone models, or as cascade models that can be daisy-chained together for a continuous length of lighting, with a
minimum of wiring.
Stand-alone models have a male quick disconnect (QD) at one end for power connection and no connections at the opposite end. A
stand-alone model may be used as the last model in the cascade series.
Cascade models have a male quick disconnect (QD) at one end for power connection, and a female QD at the opposite end for
connecting to other lights in the cascade. A double-ended accessory cordset must be used between each pair of lights in a cascade.
Models
Family Cascadable
WLS27 X
C = Cascadable
WGRXX3 = White, Green, and Red with override control
X = Non-cascadable
WYRXX3 = White, Yellow, and Red with override control
GYRXX3 = Green, Yellow, and Red with override control
WGRYB5 = White, Green, Red, Yellow, and Blue with binary control
WGRXX6 = White, Green, and Red with I/O Block control
WYRXX6 = White, Yellow, and Red with I/O Block control
GYRXX6 = Green, Yellow, and Red with I/O Block control
Wiring Diagrams
Male
1
2
4
3
Original Document
201896 Rev. A
Colors 1-5 and Control
WGRXX3
Female
2
1
3
4
8 November 2017
First or Middle of a Cascade—QD
Lighted
Length (mm)
Window Construction
0285 D
S = Sealed
D = Diffused
0285
0570
0850
1130
Key
Pin 1 Brown Input 1
Pin 2 White: Input 3
Pin 3 Blue: DC Common
Pin 4 Black: Input 2
Voltage Connector
S 24
Q
24 = 24V dc
Q = Integral 4-pin M12 QD
(mating cordset required)
201896