TL50 Pro Tower Light
Datasheet
50 mm Programmable Multicolor RGB Tower Light
Standard Compact Beacon
Standard
Omni-Directional
Sealed
Audible
Audible
Sealed Audible
Models
Family
Style
Housing
TL50
P
C
P = Pro
Blank = Standard
C = Compact
BL = Beacon
* Not available with audible
TL50 Pro models without audible have a 5-pin M12 quick disconnect for one through four segments and have an 8-pin M12 quick
disconnect for five to seven segments. Models with an audible segment have a 5-pin M12 quick disconnect for one through three
segments and have an 8-pin M12 quick disconnect for four through six segments.
Configuration Instructions
Pro Editor
Original Document
209142 Rev. D
•
Rugged, cost-effective, and easy-to-install multi-segment tower lights
•
Programmable using Banner's Pro Editor software and Pro Converter Cable
•
Illuminated segments provide easy-to-see operator guidance and indication of
equipment status
•
Up to 7 segments available
•
Available in black or light gray housing to match different machine styles
•
Audible models available with standard, sealed, or omni-directional audible element
•
Compact and beacon models are more intense in a smaller form factor compared to
standard models
•
10 V DC to 30 V DC operation
•
Bimodal inputs (PNP/NPN), depending on source wiring
Number of
Segments
Audible
3
1 = 1 Segment
Blank = None (IEC IP67)
2 = 2 Segments
A = Audible (IEC IP50)
3 = 3 Segments
ALS = Sealed Audible Continuous Tone
4 = 4 Segments
AOS = Omni-Directional Sealed Audible
5 = 5 Segments
Continuous Tone
6 = 6 Segments
AOSI = Omni-Directional Sealed Audible
7 = 7 Segments *
Continuous Tone with Intensity Adjust
Use Banner's Pro Editor software and Pro Converter Cable to create custom
configurations by selecting different colors, flash patterns, and animations.
For more information visit www.bannerengineering.com/proeditor.
19 October 2021
Housing
Color
A
Blank = Black
C = Cool Gray
Blank = 2 m integral cable
Q = 5-pin or 8-pin M12 QD
QP = 150 mm cable with a 5-pin
or 8-pin M12 QD
Connector
Q
209142