Related Manuals for Banner WLF12 Pro Series
Summary of Contents for Banner WLF12 Pro Series
- Page 1 WLF12 Pro Flexible Multicolor Strip Light Instruction Manual Original Instructions p/n: 234631 Rev. B March 13, 2024 © Banner Engineering Corp. All rights reserved.
-
Page 2: Table Of Contents
FCC Part 15 Class A for Unintentional Radiators ............................11 Industry Canada ICES-003(A)..................................11 Dimensions ........................................12 Chapter 6 Accessories LC25 LED Controllers....................................13 Mounting Accessories....................................13 Cordsets ........................................14 Splitter Cordsets ......................................15 Chapter 7 Banner Engineering Corp Limited Warranty............. 17 ... -
Page 3: Chapter 1 Features
Warnings, and installation instructions of this device. Pro Editor Use Banner's Pro Editor software and Pro Converter Cable to create custom configurations by selecting different colors, flash patterns, and animations. For more information visit www.bannerengineering.com/proeditor. -
Page 4: Models
IP67, IP69K per DIN with a 4-pin M12 male quick-disconnect cascadable Multicolor 40050-9) connector 1200 = 1200 mm 2000 = 2000 mm Models with a quick-disconnect connector require a mating cordset. March 13, 2024 © Banner Engineering Corp. All rights reserved. -
Page 5: Chapter 2 Wiring
Contact the factory for instructions on how to use a WLF12 without an LC25. Input functionality can change depending on the configuration created with Pro Editor. Refer to wiring diagrams in the selected mode in Pro Editor. March 13, 2024 © Banner Engineering Corp. All rights reserved. -
Page 6: Chapter 3 Cutting Instructions
Allow twenty-four hours for the glue to dry. Perform a remote teach operation, if applicable, or set the new number of sections of light through software using the LC25 LED Controller. March 13, 2024 © Banner Engineering Corp. All rights reserved. -
Page 7: Chapter 4 Mounting Instructions
After installing the light strip, wait twenty-four hours for the tape to adhere completely to the mounting surface. Do not touch or move the light strip during this time period. Connect the light strip to the controller. Connect the controller to the control device. March 13, 2024 © Banner Engineering Corp. All rights reserved. - Page 8 Mounting Instructions Confirm that the installation is fastened, the wiring is correct, and that the waterproof connecting wire for docking is tightened. Apply power to the light and the controller. March 13, 2024 © Banner Engineering Corp. All rights reserved.
-
Page 9: Chapter 5 Specifications
150 mm (6 in) PVC-jacketed cable with a 4-pin M12 male quick-disconnect connector Models with a quick-disconnect require a mating cordset Do not spray cable with high-pressure sprayer or cable damage will result. Operating Temperature –20 °C to +45 °C (–4 °F to +113 °F) Storage Temperature –35 °C to +70 °C (–31 °F to +158 °F) March 13, 2024 © Banner Engineering Corp. All rights reserved. - Page 10 Turck Banner LTD Blenheim House For additional product support, go Blenheim Court Wickford, Essex SS11 8YT to www.bannerengineering.com. GREAT BRITAIN Supply Supply Required Overcurrent Required Overcurrent Wiring Wiring Protection (A) Protection (A) (AWG) (AWG) March 13, 2024 © Banner Engineering Corp. All rights reserved.
-
Page 11: Fcc Part 15 Class A For Unintentional Radiators
(2) il doit tolérer toute interférence, y compris celles susceptibles de provoquer un fonctionnement non souhaité du dispositif. Refer to the CIE 1931 (x,y) Chromaticity Diagram to show equivalent color with indicated color coordinates. Actual coordinates may differ ± 5%. March 13, 2024 © Banner Engineering Corp. All rights reserved. -
Page 12: Dimensions
625 mm (24.61 in) WLF12..900.. 900 mm (35.43 in) 925 mm (36.42 in) WLF12..1200.. 1200 mm (47.24 in) 1225 mm (48.23 in) WLF12..2000.. 2000 mm (78.74 in) 2025 mm (79.72 in) March 13, 2024 © Banner Engineering Corp. All rights reserved. -
Page 13: Chapter 6 Accessories
Mounting Accessories LMBWLF12C 2X Ø2 • Set of 10 clamp brackets • Translucent silicone • Designed for M3 or No. 4 mounting hardware March 13, 2024 © Banner Engineering Corp. All rights reserved. -
Page 14: Cordsets
Male Straight/ Female Straight 44 Typ. [1.73"] MQDEC-410SS 3 m (9.4 ft) M12 x 1 1 = Brown ø 14.5 [0.57"] 2 = White 3 = Blue 4 = Black March 13, 2024 © Banner Engineering Corp. All rights reserved. -
Page 15: Splitter Cordsets
L1, L2 S15YB-M124-M124-0.2M 2 × 0.2 m (7.9 in) BRANCH 1 (FEMALE) M12 x 1 M12 x 1 5-Pin Threaded M12 Splitter Cordset with Flat Junction—Double Ended Model Trunk (Male) Branches (Female) Pinout (Male) Pinout (Female) CSB4-M1251M1250 0.3 m (0.98 ft) Four (no cable) Continued on page 16 March 13, 2024 © Banner Engineering Corp. All rights reserved. - Page 16 Pinout (Male) Pinout (Female) Branch 1 2 x 19 Branch 2 1 = Brown 72 mm 4 = Black 2 = White Branch 3 5 = Gray 3 = Blue 3 x 18 Branch 4 Male Trunk 32 mm Length March 13, 2024 © Banner Engineering Corp. All rights reserved.
-
Page 17: Chapter 7 Banner Engineering Corp Limited Warranty
Engineering Corp. will repair or replace, free of charge, any product of its manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty period. This warranty does not cover damage or liability for misuse, abuse, or the improper application or installation of the Banner product. - Page 18 LinkedIn Twitter Facebook © 2024. All rights reserved. www.bannerengineering.com...
- Page 19 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Banner Engineering WLF12PXRGB1200SQP WLF12PXRGB2000SQP WLF12PXRGB300SQP WLF12PXRGB600SQP WLF12PXRGB900SQP...
Need help?
Do you have a question about the WLF12 Pro Series and is the answer not in the manual?
Questions and answers