Table of Contents
Advertisement
Configuration
4.2 Procedure for configuration
Basic procedure
Always use the following procedure for configuration:
1. Create a STEP 7 project in the SIMATIC Manager.
2. Configure the required F-CPU and a PROFINET connection in the hardware
3. Insert a Mobile Panel 277F IWLAN in the configuration from the hardware catalog of the
4. Call the object properties of the Mobile Panel 277F IWLAN using the context menu (right
5. Configure other components in accordance with your plant.
6. Create a safety program for the F-CPU in STEP 7 with S7 Distributed Safety. Insert the
7. Start WinCC flexible ES and create a project for the HMI using the Wizard.
8. Set "Ethernet/Wireless" in the project view under "Communication".
9. Set the PROFIsafe address of the HMI device in the project view under "Device settings"
10. Configure the effective ranges planned for your plant under "Device settings" > "Effective
11. Configure the figures for operating and monitoring the plant. Insert the objects required
Further information
You have central access to SIMATIC documentation under SIMATIC in the Start menu on
the configuration computer.
More detailed information can be found under the following references:
Tool
STEP 7, HW Config
S7 Distributed Safety
WinCC flexible
54
configuration "HW Config".
HW Config by dragging it to the PROFINET connection in the station window via
Drag&Drop.
mouse button) and configure the communication between the HMI device and the PLC,
see Assigning parameters for communication between the HMI device and the controller
(Page 55).
F-FBs required for the HMI device in the safety program and wire them according to
instructions. Do this according to the checklist Checklist: Creation of the safety program
(Page 59).
> "Device settings".
ranges", see Effective ranges editor (Page 73).
for working with effective ranges in these figures, see Objects for the Mobile Panel 277F
IWLAN (Page 73).
Task
Creation of the project for the
automation system
Creation of the safety program
Creation of the project for the
HMI device
Fail-safe operation of the Mobile Panel 277F IWLAN
Function Manual, 08/2008, 6AV6691-1FQ01-2AB0
Documentation
SIMATIC > Documentation >
desired language
SIMATIC > Documentation >
desired language
SIMATIC > WinCC flexible 2007
> WinCC flexible help system
Advertisement
Table of Contents
